| Usage Tips Accessories | | Product Summary |
|---|
The Laptop Holder from HAT Innovative is capable of securely holding most laptops and tablets (with or without cases) at a more ergonomic viewing height/position when used with a compatible monitor arm. As it also lifts the laptop or tablet clear of the desk it can open up space for documents or devices. This highly-adaptable holder can be mounted to any 100mmm VESA mount and is also equipped with a Quick Release adapter that fits the 7500 Wing Dual Monitor Arm. Adjustable arms on the sides can open or close to accommodate a very wide range of device dimensions. The four clamps (one on each side arm and two on the bottom rail) are also able to slide along the arms and rail to give access to ports at any point. These clamps are also equipped with a ratchet mechanism that can accommodate devices up to 1.125" in thickness. The open-top design lets the laptop or tablet device be easily removed and replaced once initial setup is completed. An ideal partner arm for many desk applications would be the PROXIMA Lateral Monitor Arm which offers almost effortless articulation for screen adjustment.
NOTE: The 1.25 pound weight should be added to the laptop weight when determining the total weight load for monitor arm selection. | | Ergonomic Benefits |
|---|
Reduces the Risk of Neck Injury A primary risk factor for injury in an office setting is an improperly positioned monitor. Using the Laptop Holder to elevate a screen greatly reduces the risk of injury to the neck from sustained bending to view a monitor that is at desk height.
Cam Optimize the Viewing Angle Because most monitor mounts offer pan, tilt and height adjustment, when a laptop or tablet is secured in the Laptop Holder it is possible to align the monitor for the best viewing position. These capabilities also make it easier to eliminate glare from lighting or windows.
Monitors are best viewed when the screen is parallel to the face Monitors are best viewed when the screen is parallel to the face. The ideal angle of the monitor is not necessarily perpendicular to the desk in all cases, however, since some may feel more comfortable slightly tilting their head forward, especially when working in a standing position. Note: As the head tilts forward, there is typically increased weight and load placed on the muscles in the neck, and as such any flexion should be limited to no more than 10 degrees.
Increases Desktop Space By elevating the device above the worksurface, previously inaccessible desktop space is made available for storage and other office accessories (phones, calculators, etc.).
Helps Maintain Good Posture When Seated When a monitor is too low, people may choose to adjust the position of their torso instead of, or in addition to, their neck in an attempt to accommodate incorrect monitor height. This will often result in adopting a leaning forward posture, shifting them out of the ideal “S” posture in the spine, and losing any potential lumbar support that their chair provides. Using the Laptop Mount to move the laptop or tablet to an elevated position on a monitor mount may prevent this risk factor from arising.
| | Features |
|---|
- Accommodates Most Devices: The adjustable side arms and sliding device clasps let the Laptop Mount adjust to accommodate a wide range of device dimensions and thicknesses. In fact, these capabilities are sufficient to accommodate almost any device currently available.
- Mounts to Any 100mm VESA Mount: Most monitor arms or mounts will accommodate the 100mm mount. When determining the suitability of a monitor arm add the 1.25 pound weight of the Tablet Mount to the device that will be mounted to ensure compatibility with the weight capacity of the arm.
- Easy Device Installation/Removal: The open-top design lets a tablet or laptop be dropped into position or be removed in just seconds. Once the arms and clamps are adjusted for the device it simply slide in and out from the top.
- Unobstructed Access to Ports: The sliding clasps are adjustable along the side and front edge of the laptop to ensure easy access to any port for device connection.
| | Images and Multimedia |
|---|
Innovative Laptop Holder in Use
| 
Innovative Laptop Holder (front view)
| 
Innovative Laptop Holder (rear view)
|
| | Technical Specifications |
|---|
- Ratchet Clasp Opening: 0.75" (19 mm) to 1.125" (28.5 mm)
- Weight: 1.25 lbs (575 grams)
- Mounting: 100mm VESA hole pattern or can mount to the 7500 Wing Dual Monitor Arm Quick release.
- Warranty: 10 years
| | Models |
|---|
| For related products, visit our online product listing. | | Model # | Description | TD Synnex SKU |
|---|
| 5501-124 | Laptop Holder for monitor arms, Silver | |
|
|
